MODEL

NQEB

Air bleed and start-up valve

SERIES 2 / CAPACITY: 15 - 200 L/min. / CAVITY: T-3A

Air-bleed and start-up cartridges are used to purge air trapped in the system to help reduce power requirements

and facilitate pump priming during the start-up of blocked center circuits.

X Not Adjustable

snhy.com/NQEB

TECHNICAL FEATURES

Air-bleed and start-up valves require a minimum of 4 gpm (15 L/min.) flow rate and 80 psi (5,5 bar) system pressure.

The valve will re-open when system pressure falls below 25 psi (1,7 bar)

After air has been purged, closing times vary from approximately 12 seconds at 4 gpm (15 L/min.) to 0.5 seconds at 50 gpm 200 L/min.).

Incorporates the Sun floating style construction to minimize the possibility of internal parts binding due to excessive installation torque and/or cavity/cartridge

machining variations.